Your beds start, run and stop on their own
Dedicated relay boxes wire Solaryx to every bed: no manual timers, no forgotten shutdowns, no accidental overruns, from one bed to a full multi-room setup.
From the POS button to the bed
Sell a session at the till and the bed does the rest: preparation, the exact time sold, then ventilation. Nobody walks to a timer, and no session runs longer than what was paid for.
Turnaround handled automatically
The bed picker shows every bed's real state: free, running or cooling down. Heating and airing time is reserved around each session, so nobody is sent to a bed that is still venting. Customers who have paid wait in a column beside the beds: tap one, and the beds that can take them light up.
Solarium Control & Safety
Tamper-Proof Relay Boxes
Each box carries a unique identity, so a swapped or cloned device is detected, and the register alerts the moment a controller goes offline. A daily status shows which box has been dropping out.
Electricity Cost per Session
Every session is costed in electricity as it ends, without a meter: the bed's power comes from the catalog, and the lamps count only while they burn. Set your price per kWh, single rate or day and night, and the energy report shows what each bed costs.
Works with Ergoline and megaSun
Two wires on the bed's timer input. Another brand? We check the model before installation.
Session Stop Reasons & Wrong-Bed Transfer
Stopping a session always records why. Started someone on the wrong bed? One click moves the whole session across, and a wrong session length is switched to the right one on the same bed. A session cut by a relay box outage is recorded as interrupted, never as delivered in full.
Waiting Room on the Solarium Screen
Paid customers without a bed wait beside the beds. Tap one and the beds that can take them light up.
Technical & Inspection Runs
Run a bed without a customer for inspections or demos. Logged, blocks the planning, never touches billing.
Maintenance Checklists
Guided upkeep routines launched from the POS, each assigned to the employees who carry it out. Fill them in over several visits, and every run stays logged. The register prints a report or a full inspection file listing missed deadlines.
Sunbed Catalog & Equipment Records
Pick each bed from a catalog of commercial models (Ergoline, megaSun, Luxura, Soltron): lamp lifetime and UV output come prefilled.
Lamp Replacement Tracking & Alerts
Record every lamp replacement with its running hours, and get flagged when lamps are due, before output fades.
Updates & Monitoring Included
The boxes are monitored in real time: if one fails, we are alerted and we restart or replace it.
Phototypes, legal delays and age limits live on the Belgian compliance page →
Lamp wear, in plain sight
Every bed shows how worn its lamps are in the back office, and at the register to the manager. Replacements are logged with their running hours, a bed taken over with used lamps gets its counter corrected by hand, and you are warned before the output fades.
Frequently asked questions
Yes. Through dedicated relay boxes, beds start, count down and stop automatically, from a single bed to a full multi-room setup, with prep / running / ventilation phases and power-outage recovery.
Our monitoring alerts us as soon as a box stops responding, and we restart or replace it. You never have to work on the hardware yourself.
Nothing irreversible. When power comes back the system recovers the state of the beds and resumes cleanly, without charging the customer twice.
Yes. The relay box connects to the bed with two wires, on the same input as a reception timer or a coin box. Another brand? Send us the model: we check it before installation and adapt the wiring if needed.
Explore more
Every part of Solaryx, one click away. Or book a demo on your own salon.